Skip to content

Ethylene-vinyl-acetate EVA layer film for laminated glass

[email protected]

Industrial High Temperature Polyester Pet Green Masking Tape

Posted bycncglass December 24, 2017

Industrial High Temperature Polyester Pet Green Masking Tape

Posted bycncglassDecember 24, 2017Posted inUncategorized

Post navigation

Previous Post Previous post:
High temperature Polyester green masking tape for PCB Plating
Next Post Next post:
PET Adhesive tape is made of polyester film coated with Silicone resin

Recent Posts

  • heavy duty hot knife for eva pvb sgp interlayer remains trimming (11)
  • heavy duty hot knife for eva pvb sgp interlayer remains trimming (11)
  • PTFE high-temperature net belt Fiberglass fabric coated with PTFE is made up of high-capability fiberglass which has steeped into PTFE. It is a new product with Main capability and characteristics: 1). It can be used under the temperature of -196°C to 300°C, which has the capability of weather resistant and age resistant. Under practical situation of high temperature of 250°C for 200 days, not only the intensity will not decrease, the weight will not reduce; if put it under the high temperature of 350 °C for 120 hours, the weight only decreased by about 0.6%; under the situation of -180 °C, it will not chap and keep the original pliability; 2). Hardly to adhere any material; it is easy to wash away the blot or other dust such as resin, coating material, etc. 3). Chemical corrosion resistant, it could resist acid, alkali, aqua fortis and various kinds of organic liquid corrosion; 4). Good dimension stability (the ratio of extending is lower than 0.5%), High intensity, good mechanical capability; 5). Resisting impotence caused by bend, and it could be used on smaller tread; 6). Capability of medicament resistant and non-poison, almost to resisting all kinds of medicament; 7). Fireproofing and flame resisting. 8). Capability of breathe freely, the rate of breathe of conveyer belt which reduce the consuming of heat and increase the efficiency of drying. thickness: 0.2-1.2mm width: 300-4200mm mesh size: 1-10mm, square(4×4mm, 1×1mm, etc.) color: coffee, black We could provide “PTFE mesh fabric”. SAFETY GLAZING VACUUMING MESH HIGH TEMP CONVEYOR BELT MESH TEFLON MESH PTFE MESH Peter Lin, [email protected], [email protected] Whatsapp: 0086 15013829504, WeChat: WeCan365 www.cncglass.com www.cnceva.com
  • (no title)
  • PET Adhesive tape is made of polyester film coated with Silicone resin

Recent Comments

  • enzyme definition on EVASAFE EVAFORCE EVALAM COOLSAFE interlayer film safey glazing vacuuming silicone vacuum bag samples
  • Mr WordPress on Hello world!

Archives

  • November 2019
  • October 2018
  • December 2017
  • September 2015
  • March 2015
  • December 2014

Categories

  • Uncategorized

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org
Ethylene-vinyl-acetate EVA layer film for laminated glass, Proudly powered by WordPress.